Turtle Wax Speed HeadLight Lens Restorer kit – 53686

Turtle Wax Speed HeadLight Lens Restorer kit – 53686 by Turtle Wax

STEP 1
Thoroughly clean headlight lens and use masking tape to protect nearby painted surfaces. Products to be used on cool surfaces avoiding direct sunlight. Apply Headlight Lens Repair & Renew Compound to one lens at a time. Spread product over dull headlight using moderate pressure with slow back and forth motion. Buff area with cloth, repeat if necessary. If headlight is not evenly restored proceed to sanding step.

STEP 2
Use tap water to wet headlight and sanding pads (always keep headlight and sanding pad wet). Use moderate pressure on green pad #1 rub side to side focusing on dull or damaged areas. Flip sanding pad to #2 and rub in opposite direction again focusing on dull or damaged areas. Wipe dry with a clean cloth.

STEP 3
Reapply Headlight Lens Repair & Renew Compound with firm pressure and buff with clean cloth to achieve maximum lens clarity. Restore both Headlights before applying Ceramic Acrylic Wipe. Open one wipe using gloves supplied and apply quickly over both Headlights using even back and forth stokes. Do not touch, wet or drive vehicle for 5 minutes as product needs to dry. Ceramic Acrylic Coating will fully cure in 24 hours.
For higher clarity and gloss polish lens after fully cured with Headlight Lens Repair & Renew Compound. Extra wipe can be used to add additional clarity and protection or for a second set of Headlights.STEP 1
Thoroughly clean headlight lens and use masking tape to protect nearby painted surfaces. Products to be used on cool surfaces avoiding direct sunlight. Apply Headlight Lens Repair & Renew Compound to one lens at a time. Spread product over dull headlight using moderate pressure with slow back and forth motion. Buff area with cloth, repeat if necessary. If headlight is not evenly restored proceed to sanding step.

STEP 2
Use tap water to wet headlight and sanding pads (always keep headlight and sanding pad wet). Use moderate pressure on green pad #1 rub side to side focusing on dull or damaged areas. Flip sanding pad to #2 and rub in opposite direction again focusing on dull or damaged areas. Wipe dry with a clean cloth.

STEP 3
Reapply Headlight Lens Repair & Renew Compound with firm pressure and buff with clean cloth to achieve maximum lens clarity. Restore both Headlights before applying Ceramic Acrylic Wipe. Open one wipe using gloves supplied and apply quickly over both Headlights using even back and forth stokes. Do not touch, wet or drive vehicle for 5 minutes as product needs to dry. Ceramic Acrylic Coating will fully cure in 24 hours.
For higher clarity and gloss polish lens after fully cured with Headlight Lens Repair & Renew Compound. Extra wipe can be used to add additional clarity and protection or for a second set of Headlights.

Check out reviews here:

Car Care Products Reviews 

Browse our other products:

SA Motor World Shop